Suction and Discharge Hoses

Hoses and Hose Lines for Oil & Gas Applications

We developed this hose type for fine and slightly abrasive dredge material.

Suction and Discharge Hoses with Flanges

You use it:

  • For hydraulic transport of various materials (abrasion layer thicknesses of 10-50 mm),
  • For pneumatic transport of granulated and powdery materials,
  • For transporting untreated fresh or salt water,
  • For transporting drinking water while using special certified rubber qualities,
  • For pressures up to 100 bar (dependent on the interior diameter)


Installation for Example:

Suction and Discharge Hoses

Discharge Hose And E + S-PE Floating Collars At Half Submerged Pipe Line

Suction and Discharge Hoses

Discharge Hose In Floating Pontoon Pipeline

Operating temperature: -30 to +90 °C
Permissible aromatic content: max. 30 %
Max. permissible H2S content:
H2S content up to 60 °C 3000 ppm
H2S content up to 90 °C W.T.: 1000 ppm

Recommended maximum flow velocity:
20 m/s for powder; 15 m/s for grains;
8 m/s for semifluid material (pulp)

Max. available lengths: up to 33.5 m
Production tolerance: hose lengths +/- 1 %

  • The minimum bending radius is related to the constructional design of the individual hoses
  • On request, fire-proof models are also available (in accordance with Lloyd‘s Register OD 1000/499)
  • Additional external reinforcements or protective cladding can be retrofit if desired depending on the application field


Suction and Discharge Hoses

Suction and Discharge Hoses

Eddelbüttel + Schneider