Loading Hose Applications
Offshore Marine Hoses
A large number of proven, customised loading hose designs have resulted through ContiTech Oil & Gas’ involvement in North Sea oilfield development. The principles of such hose design also extend to other applications worldwide.
Single Point Mooring and Tandem
The standard range of Dunlop Oil & Marine single and double carcass hoses is widely utilized on Catenary Anchor Leg Mooring (CALM) buoy terminals.
The Reflex Hose Option
Most hose types can be supplied with a Reflex construction. A Reflex hose does not have any helical wire reinforcement.
Hoses for Liquid Petroleum Gas (LPG) Transfer
Dunlop Oil & Marine hoses have been widely used over many years for LPG transfer in dock-side applications.
Refined Products and Other Chemicals
For many product applications, the Dunlop standard nitrile rubber hose lining provides the required resistance to product attack.
Line Capacity and Pressure Losses
The OCIMF Hose Guide states maximum flow velocity of 21 m/s for nominal hose bores up to 400mm.
System Design Services
Dunlop Oil & Marine can provide system design support to assist in both new project development and review of existing terminal operations.