Fire Rated Hoses

Hose & Couplings

The ContiTech Oil & Gas range of fire rated hoses was established over 25 years ago and is used on both offshore and onshore installations worldwide for the safe suction and delivery of oil and fuel in high fire risk areas.

The range of Fireshield Blowout Preventer control hoses is available in sizes from 1/4″ to 2″, operating at working pressures up to 5000 psi and temperatures from -40 °C to +100 °C. It is tested and approved by Lloyds to Standard OD/1000/499 and ABS ISO 15540 and 15541. Fireshield 5000 is typically used on onshore, offshore and drilling applications primarily on the Blow Out Preventer (BOP) providing hydraulic power to seal the well head in an emergency situation where operation is critical during exposure to fire and high temperature.

Firewater 300 is a fire rated hose transferring water for the deluge system. It is available in size from 2” to 8” and operates at up to 300 psi. Firewater 300 is tested and approved to Lloyds OD/1000/499 and ABS ISO 15540 and 15541. ContiTech Oil & Gas also have a specifically designed fire rated oil hose for conveying most oil based mediums. It is also tested and approved in accordance with Lloyds OD/1000/499.


Product Range: Fire Rated Hoses

Application ID
Product Type Data Sheet
Water deluge 51 - 203 2 - 8 21 305 FW300 Hardwall PDF
based medium
51 - 203 2 - 8 16 232 DO16HFR Hardwall PDF
Blow Out Preventer
6.5 - 51 1/4 - 2 345 5000 FS500 Wire reinforced PDF


Fire Rating: Fire Rated Hoses

3rd party
Standard Temp
Duration Pressure Subsequent
Lloyds OD/1000/499 700 BOP: 5 min
FW: 30 min
Hose design pressure N/A
ABS ISO 15540
ISO 15541
800 BOP: 30 min
FW: 30 min
5 bar 2 minute
pressure test
at 2x design


Fire Rated Hoses


Fire Rated Hoses